BUSHINGS | Top |
Description |
Buy |
Bushing Converter Hub 91-Up image #032 Item #64032B | | BUSHING STATOR FRONT (.900" ID) (TH200 / TH200C / TH200-4R 76-90) (700-R4 82-84) (440-T4, 4T60E, 4T65E 84-UP) image #036 Item #54036A | | Bushing, Driven Sprocket Support to Input Drum 84-Up image #045 Item #84045 | | Bushing 2nd Clutch Housing (Front) 91-Up image #046 Item #84046B | | Bushing 2nd Clutch Housing (Rear) 91-Up image #046 Item #84046 | | Bushing Input Drum (with 4 Oil Grooves) 84-Up image #048 Item #84048A | | Bushing Front Planet (440T4, 4T60E Only) 84-99 image #053 Item #84053 | | Bushing Final Drive Ring Gear Shaft 91-Up (when out of stock purchase bushing kit) image #054 Item #84054 | | Bushing, Rear Sun Gear ( Coast Drum) (Wide Front Bushing .739" Wide) 91-UP image #056 Item #84056AA | | Bushing, Rear Sun Gear (Coast Drum) (Narrow Rear Bushing .487") 91-UP image #056 Item #84056AB | | BUSHING, CASE or EXTENSION HOUSING to FINAL DRIVE TH125 TH125C, 440T4, 4T60E, 4T40E, 4T65E image #060 Item #64060 | | Bearing Extension Housing (Caged Bearing) (Some 4T60E, 4T65E) 91-Up image #060 Item #84275H | | Bushing, Forward 1-2 Drum 91-up (1.250" Wide) (4T60E, 4T65E 91-UP) image #061 Item #84061B | |
ELECTRICAL SOLENOIDS, SENSORS, etc. | Top |
Description |
Buy |
Switch, MLPS (2 Connectors with 7 Pins and 4 Pins) 96-Up image #410 Item #D84410HA | | Switch, MLPS (Internal Mode Switch) (1 Connector with 6 Pins) 99-Up image #410 Item #D84410H | | SWITCH PRESSURE - 1 PRONG - NORMAL OPEN - 700-R4, 4T60E image #411 Item #D74411B | | Solenoid, PWM (10-15 Ohms) (Rostra Brand) (4L60E 3-2 PWM 93-95: and PWM TCC 95-UP ) (4T65E TCC PWM 1997-UP) (LCT ALLISON LCT 1000/2400 F trim 00-05) (5L40E TCC 1999-UP) image #418 Item #74418E | | Solenoid, TCC PWM 91-99 image #418 Item #84418A | | Solenoid, (Lock-Up TCC, 1-2, 3-4 Shift ) (4T60E) 91-99 image #418 Item #84421 | | Solenoid, PWM (10-15 Ohms) (O.E. DELCO Brand) (4L60E 3-2 PWM 93-95: and PWM TCC 95-UP ) (4T65E TCC PWM 1997-UP) (LCT ALLISON LCT 1000/2400 F trim 00-05) (5L40E TCC 1999-UP) image #418 Item #D74418E | | Solenoid, 1-2, 3-4 Shift (4T65E) (OE DELCO) 1997-Up image #421 Item #D84421G | | Solenoid, EPC (BorgWarner), Silver Body w/Side Connector (4T65E 97-02) (5L40E 1999-03) (4T40E, 4T45E 95-03) image #431 Item #84431G | | Solenoid, EPC (OEM Holly), Black Body with Top Connector (4T65E) 97-02) (5L40E, 5L50E, 4T40E, 4T45E 1999-03) image #431 Item #D84431G | | Solenoid, EPC (OEM Bosch Design) Silver Body (4T65E 03-UP) (5L40E, 5L50E, 4T40E, 4T45E 04-Up) image #431 Item #D84431H | | Sensor, Output Speed (VSS) (4T60E) 91-99 (4T65E) 97-99 (Short Connector 2" Tall) image #436 Item #D84436A | | Sensor, Output Speed (VSS) (4T65E) (Volvo) (Molded Bracket) L02-Up image #436 Item #D84436K | | Sensor, Output Speed (VSS) (4T65E) (Volvo) (Metal Bracket) 99-E02 image #436 Item #D84436J | | Sensor, Output Speed (VSS) (4T65E) (Long Connector) 99-Up image #436 Item #D84436G | | Sensor, Temperature (TOT) 91-99 image #437 Item #D84437E | | Sensor, Input Speed (TSS) (4T65E) (Except 99-Up Volvo) 97-Up image #438 Item #D84438G | | Sensor, Input Speed (TSS) (4T65E) (99-Up Volvo) 99-Up image #438 Item #D84438GA | | Switch, Manifold (OEM) (Pressure Range Sensor) (4T65E) 6 Bolts (4 Prong) 97-02 image #442 Item #D84442G | | Switch, Manifold (ROSTRA) (Pressure Range Sensor) (4T65E) 6 Bolts (4 Prong) 97-02 image #442 Item #A84442G | | Switch, Manifold (OEM) (Pressure Range Sensor) (4T65E) 3 Bolts (1 Prong) (1 Switch) 03-Up image #442H Item #D84442H | | Switch, Manifold (AMD) (Pressure Range Sensor) (4T65E) 3 Bolts (1 Prong) (1 Switch) 03-Up image #442H Item #A84442H | | CONNECTOR 4 PIN SQUARE GM UNIVERSAL 2,3, OR 4 PIN image #444 Item #84444U | | Case Connector (Round 7 Prong) (4T60E, 4L30E) 94-99 image #444 Item #D84444C | | CONNECTOR, Square Plug - Case Connector 3 Prong (O-Ring 44369B Not Included) THM200-4R, 4L30-E, THM700-R4, THM125/M34, THM350C, THM700-R4/4L60/MD8, THM125C, 3T40 image #444 Item #74444A | | Wire Harness, Internal (4T65E) (Universal - Replaces 14, 16, 17 and 19 Pin) (works with Internal Mode switch type ) 97-Up image #446 Item #84446HB | |
BORGWARNER FRICTION PLATES | Top |
Description |
Buy |
FRICTION, 4th Clutch (18Teeth .070") (440-T4 91-93) (4T60E 91-99) image #100 Item #B84100A | | FRICTION PLATE, 4th Clutch (32T) (4T65E) 97-Up image #100 Item #B84100G | | CLUTCH PLATE, 4th Clutch (1 Sided, Internal Teeth) (4T65E) (Volvo and 05-Up GM Tap Shift) image #100 Item #B84100GA | | FRICTION, 2nd Clutch (38T) (440-T4, 4T60E) 84-99 (Borg Warner) image #104 Item #B84104A | | FRICTION, 2nd Clutch (42T) (4T65E) 97-Up (Borg Warner) image #104 Item #B84104G | | CLUTCH PLATE, 3rd Clutch (.082") (1 Sided, 32 Internal Teeth) (Hi-Energy) 01-Up 4T65E (Borg Warner) image #106 Item #B84106C | | CLUTCH PLATE, 3rd Clutch (.080") (1 Sided, 32 Internal Teeth) 91-Up 4T60E, 4T65E (Borg Warner) image #106 Item #B84106B | | FRICTION, Input Clutch (30T) (Used with Diode Type Sprag #648) 03-Up 4T65E image #108 Item #B84108B | | FRICTION, Input Clutch (.090") (32T) 84-E94 image #108 Item #B84108 | | FRICTION, Input Clutch (.065") (32T) 4T60E, 4T65E, L94-02 image #108 Item #B84108A | | CLUTCH PLATE, 4th Clutch (1 Sided Steel, External Teeth) (4T65E) (Volvo and 05-Up GM Tap Shift) 99-Up image #120 Item #B84120GA | | CLUTCH PLATE, 3rd Clutch (.078") (1 Sided, 12 External Teeth) (Hi-Energy) 01-Up 4T65E (Borg Warner) image #126 Item #B84126C | | CLUTCH PLATE, 3rd Clutch (.078") (1 Sided, 12 External Teeth) 91-Up 4T60E, 4T65E (Borg Warner) image #126 Item #B84126AB | |
GASKETS, O-RINGS & MISC. ITEMS | Top |
Description |
Buy |
LATHE CUT SEAL 1-2 / 3-4 ACCUMULATOR 81-UP (200-4R 3-4 only), 700-R4, 4L60E, 4T60E, 4T65E: D TYPE RUBBER SEAL. (700R4 82-86 TEFLON USE 32324T) image #191, 352 Item #54352A | | GASKET, Bottom Pan (Bonded Rubber) (6mm OR 8mm Pan Bolts) (1991-1999 4T60E) (4T65E 1997-ON) image #300 Item #84300EAW | | GASKET Bottom Pan (Fiber) (4T60E) 91-99 image #300 Item #84300EF | | SEAL, Side Cover (Inner) (4T65E) (Lathe Cut Seal) 97-Up image #301 Item #84301GA | | GASKET, Side Cover (Outer) (440-T4, 4T60E) (Fiber) 84-93 image #301 Item #84301F | | GASKET, Side Cover (Outer) (4T60E) (Bonded Rubber) 94-99 image #301 Item #84301E | | GASKET, Side Cover (Outer) (4T65E) (Bonded Rubber) 97-Up image #301 Item #84301GW | | GASKET, Side Cover (Inner) (440T4, 4T60E) 91-95 (6 bolt holes, fiber gasket) image #301 Item #84301JF | | SEAL, Side Cover (Inner) (4T60E) (Lathe Cut) 94-99 image #301 Item #84301LA | | Gasket, Accumulator Cover (Both gaskets with Spacer Plate) (4T65E) 1997-Up (When out of stock buy overhaul kit) image #308 Item #84308G | | Gasket, Accumulator Cover (Both gaskets with Spacer Plate) (4T60E) 91-99 (When out of stock purchase overhaul kit for this part) image #308 Item #84308A | | O-Ring, Pump Slide (under slide ring) (84-UP) image #313 Item #84313 | | SEAL PUMP SLIDE RUBBER ROUND WEDGE GM image #314 Item #54314B | | SEAL PUMP SLIDE: FLAT TEFLON WEDGE GM image #315 Item #54315B | | Gasket, Valve Body Spacer Plate to Channel Plate (4T60E) 91-92 image #320 Item #84320B | | Gasket, Valve Body Spacer Plate to Channel Plate (4T60E) 93-99 image #320 Item #84320BA | | Gasket, Valve Body Spacer Plate to Channel Plate (4T65E) 97-Up image #320 Item #84320G | | Valve Body Separator Plate (Bonded gaskets) (4T65E) 99-03 (Except Volvo) image #320 Item #84320K | | Gasket Kit, Valve Body (4T65E) (Volvo) 97-Up image #320, 321 Item #84320GAK | | Gasket, Valve Body to Spacer Plate (4T65E) 97-Up image #321 Item #84321G | | Gasket, Valve Body to Spacer Plate (4T60E) 91-92 image #321 Item #84321B | | Gasket, Valve Body to Spacer Plate (4T60E) 93-99 image #321 Item #84321BA | | Gasket, Lower Channel Plate (4T65E) 97-Up (updated OEM metal gasket) image #325 Item #84325J | | Gasket, Lower Channel Plate (4T60E) 91-99 image #325 Item #84325A | | Gasket, Upper Channel Plate (4T65E) 97-Up (updated OEM metal gasket) image #325 Item #84325H | | Gasket, Upper Channel Plate (4T60E) 91-99 image #325 Item #84325E | | Lathe Cut Seal, Extension Housing to Case 91-Up 4T60E / 4T65E image #348 Item #84348 | | Lip Seal, Reverse Servo Piston ( 4T60E) 91-Up image #363 Item #84363A | | O-ring, Forward 1-2 Servo Cover (4T65E) 97-Up image #364 Item #84360 | | O-Ring, (440-T4 Forward and Reverse Servo Cover 84-UP) (4T60E Reverse Servo Cover 91-Up) image #364 Item #84364 | | O-Ring, Forward 1-2 Servo Cover (4T60E) 91-Up image #364 Item #84364B | | O-Ring, Reverse Servo Cover (4T65E) 97-Up image #364 Item #84364C | | MULTI LIP SEAL SLEEVE OIL FILLER TUBE image #371 Item #44371B | | O-Ring, Converter Clutch Solenoid Screen (ON V.B. PLATE) 91-Up image #376 Item #84376 | | SEAL, OIL FILTER NECK image #379 Item #84379 | | O-RING TURBINE SHAFT .950" 125C / 440-T4 / 4T60E / 4T65E / TH700 5L40E/5L50E image #380 Item #64380 | | DOWEL PIN, valve body dowel, 440-T4, 4T60E, 4T65E image #485 Item #U84485 | | Clip, Cooler Line Fitting (Clip only: Push-In Fittings for 3/8" line) 91-Up image #496, 996 Item #74496A | | CHECK BALL STEEL .250" VARIOUS valve bodys (each) image #741 Item #44741-5 | | Repair Kit, Fixes 5 Valve Body Plate Holes with 1/4" Check Balls, Fits Most Applications image #747, 741, 740 Item #VB-101 | | Pan Magnet, Square (.180" Thick, 1.100" x .750") image #839 Item #A44839 | | Pan Magnet, Round (.250" Thick, 1 3/4" OD) image #839 Item #A44839B | |
HARD PARTS NEW | Top |
Description |
Buy |
Axle Stabilizer, Driver Side (w/ Bearing and Seal) 91-99 image #275 Item #T84275 | | Axle Stabilizer, Passenger Side (w/ Bearing and Seal) 91-Up image #275 Item #T64275 | | Vane and Ring Kit, Pump (9 Vanes, 2 Rings) (440T4, 4T60E) 84-99 image #533, 538 Item #84533AAK | | Ring, Pump Vane Ring 91-Up (each) image #538 Item #A84538 | | DRUM, 2nd Clutch (NEW AMD) Drum (4T65E) 98-Up (10 Degree Splines) (Retros 97-Up if used with 84624BA reaction shell) image #552 Item #A84552GA | | HUB, 4th Clutch Hub / Shaft (32T) (4T65E) 97-Up image #570 Item #A84570G | | 4th Clutch Hub/ Shaft (Has no Bearing at the Clutch Hub End) 4T60E 96-99 image #570 Item #A84570B | | HUB, 4th Clutch Hub/ Shaft (Has Bearing at the Clutch Hub End I.D.) 440-T4, 4T60E 84-95 image #570, 220 Item #A84570A | | Sun Gear, (AMD) Input (Front) (with 2 Flats on Splines) L93-99 (4T60E ) (use with shaft bearing #241 type) image #612 Item #A84612A | | Sun Gear, (AMD) Input (Front) (with 2 Flats on Splines) 1997-2018 (4T65E ) USES NO BEARING ON I.D. SHAFT to GEAR image #612 Item #A84612B | | Shell, Reverse Reaction (4T60E) (Hardened) 91-99 (AMD) image #624 Item #A84624 | | Shell, (O.E.) Reverse Reaction (4T65E) (10 Degree Lugs, round holes) 4T65E 98-Up (OEM) image #624 Item #D84624BA | | Pump Shaft, Oil Pump Drive (9.750" Long) (440-T4, 4T60E) 84-99 (AMD) image #671 Item #A84671 | | Pump Shaft, Oil Pump Drive (10" Long) (4T65E) 97-Up (AMD) image #671 Item #A84671G | | Pump Shaft, Oil Pump Drive (10" Long) (4T65E) 97-Up (OEM) image #671 Item #D84671G | | Oil Lube Dam, Front to Rear Planet 84-Up image #698 Item #A84698 | | Chain Set (4T65E) (.500" Wide) (Dual Chains) (with Mouse Ear Link and D Pins) 97-Up image #700 Item #A84700G | | Chain, (.875" Wide, 42 Links) (4T40E 97-Up) (4T60E 93-99 Except Round Pins) Replaces Rocker Joint Pins and D Pins image #700 Item #A14700B | | Chain (4T60E) (Round Pin 7/8" Wide) 91-93 (42 Links) (84-93) (Except Allante) image #700 Item #A84700A | | Spring, 1-2 Accumulator (Orange/Green) 91-99 image #926 Item #A84926 | | Piston, 1-2, 3-4 Accumulator Piston (TransGo) 1983-1999 TH440-T4, 4T60E (each) image #927 Item #A84927 | | Piston, 4th Accumulator Piston (4T65E) (Transgo) 97-08 image #927 Item #A84927G | | Piston Kit, 1-2, 3-4 (2 Pistons, 1 Spring, 1 Spacer) (Transgo) (4T60E) image #927 Item #A84927EK | | Piston, 3-4 Accumulator Deep Design (w/out Spring Recess) (Aluminum) 91-99 image #927 Item #D84927 | | Piston, 1-2 or 2-3 Accumulator Piston (each), Deep Design (with Spring Recess) (Aluminum) 4T65E 97-Up (TransGo) image #927 Item #A84927D | | Pin, 1-2 and 2-3 Accumulator (4T65E) 97-Up (each) image #928 Item #D84928A | | Piston, 2nd Clutch (Bonded Rubber) (5 3/8" OD) (4T65E) 97-Up image #962 Item #84962G | | Piston, 2nd Clutch (Bonded Rubber) (5 1/8" OD) (4T60E) 91-99 image #962 Item #84962E | | Piston, Input Clutch (10 Clutches on 3rd Clutch) (4T60E, 4T65E) 91-Up image #964 Item #D84964B | | Piston, 3rd Clutch (Bonded Rubber) (No Check Ball) (4T65E 97-UP) (Late 98-99 4T60E) image #965 Item #84965G | | Piston, 3rd Clutch (Bonded Rubber) (with Check Ball Capsule) (440-T4, 4T60E) 1984-E98 image #965 Item #84965A | | BONDED RUBBER PISTON KIT 4T65E, 1997-ON NATIONAL BRAND (84962, 84965) image #965, 962 Item #K41900-4 | |
HARD PARTS GOOD USED | Top |
Description |
Buy |
Pump, (Used) (Floating Rotor, No Rotor Support Type) (4T65E) 97-02 CASTING>> img#500, 176, 532, 533, 534, 535, 538 Item #U84500GC | | Pump (used) (No Switches) (4T60E) 91-94 img#500, 176, 532, 533, 534, 535, 538 Item #U84500E | | Pump (used) (No Switches) (4T60E) 95-99 img#500, 176, 532, 533, 534, 535, 538 Item #U84500ED | | Pump, (used) (Floating Rotor: No Rotor Support Type) (4T65E) 97-02 img#500, 176, 532, 533, 534, 535, 538 Item #U84500GA | | Pump, (used) (Has Pump Rotor Support, 3 piece body) (4T65E) 02-Up img#500, 176, 532, 533, 534, 535, 538 Item #U84500H | | Pump (used) (2 Switches) (4T60E) No Brass Air Bleed) 91-94 img#500, 176, 532, 533, 534, 535, 538 Item #U84500EB | | Converter Reactor (used) (4T60E) 91-99 img#529 Item #U84529B | | Converter Reactor (used) (4T65E) 97-Up img#529 Item #U84529G | | Vane and Ring Kit, Pump (11 Vanes, 2 Rings) (4T65E) 97-Up img#533 Item #84533ABK | | Vane, Pump 84-Up (each) img#533 Item #A84533AA | | Vane Kit, Pump (9 Vanes) (440T4, 4T60E) 84-99 img#533 Item #84533AAK-1 | | Vane Kit, Pump (11 Vanes) (4T65E) 97-Up img#533 Item #84533ABK-1 | | DRUM, (used) 2nd Clutch Drum (4T60E) (6 Clutch) (Bare drum without Bonded Rubber Piston) 91-99 img#552 Item #U84552C | | Drum, 2nd Clutch (used) (4T65E) (10 Degree Splines) (98-UP) (Retros 97-Up if used w/ 84624BA) img#552 Item #U84552GA | | Drum Forward Input (used) (4T65E) (with Caged Bearing Inside) 97-Up ( has check ball in drum) img#554 Item #U84554G | | Drum Forward Input (4T60E) (with Caged Bearing Inside) L93-99 (NO check ball in drum) img#554 Item #U84554C | | Drum, (used) Reaction Drum with Sun Gear 2.750" Tall 91-95 img#558 Item #U84558A | | Drum, (used) Reaction Drum with Sun Gear (3.250" Tall) 96-Up img#558 Item #U84558B | | DRUM, (used) Forward 1-2 Band Drum (16 Roller Type Sprag) 91-95 img#559 Item #U84559 | | DRUM, (used) Forward 1-2 Band Drum (14 Roller Type Sprag) 96-Up img#559 Item #U84559B | | PISTON KIT, (used) 4th Clutch Piston, Return Spring and Snap Ring img#560, 862, 971, 961 Item #U84560G | | Planet Front (used) (No Bushing) (4T65E) (12 Outer Lugs) 97-Up img#582 Item #U84582G | | Planet Front (No Bushing) (4T60E) 91-99 img#582 Item #U84582B | | Planet Rear (USED) (Inner Splines Beveled Both Ends) 4T60E, 4T65E 1991-Up img#584 Item #U84584A | | Planet, (used) Rear (Inner Splines Beveled on One End ) 440-T4, 4T60E, 4T65E 84-Up img#584 Item #U84584 | | Sun Gear, (USED) Input (Front) 1983-E93 440-T4 img#612 Item #U84612 | | Race, (used) Inner Sprag Race, 4T60E 91-95 (use early 16 roller sprag #A44654) img#664 Item #U84664 | | Turbine Shaft (used) (6.00" Long) (4T60E) 91-99 img#673 Item #U84673A | | Turbine Shaft (used) (6.25" Long) (4T65E) 97-Up img#673 Item #U84673G | | Shaft, (used) Final Drive Sun Gear Shaft (6.250" Long) 91-Up img#674 Item #U84674B | | Output Shaft (USED) (19.50") (no bearing journel under sun gear. has bearing journel for fourth clutch hub) (4T60E) L93-99 img#678 Item #U84678E | | Output Shaft (19.687") (Bearing inside 4th Clutch Hub Type) (4T65E) 97-Up img#678 Item #U84678H | | Output Shaft (USED) (19.50") 4T60E ( Has 3/4 inch bearing journal for sun gear 612) (4T60E) img#678 Item #U84678D | | ROTOR, (used) Input Speed Reluctor: 4T65E 97-UP img#681 Item #U84477B | | SCOOP, (used) DRIVE CHAIN SCAVENGING SCOOP (4T60E, 4T65E) 91-UP img#702 Item #U84702 | | Sprocket Set, Gemini Design (USED) (33 Drive and 37 Driven) (4T65E) 97-Up img#705 Item #U84710GAK | | Sprocket Set, Gemini Design (35 Drive and 35 Driven) (4T65E) 97-Up img#705 Item #U84710GK | | Sprocket Set, Gemini Design (37 Drive and 33 Driven) (4T65E) 97-Up img#705 Item #U84710GBK | | Support, (used) Driven Sprocket (4T60E) (92-99) img#713 Item #U84713C | | Support, (used) Driven Sprocket (2nd Design Sealing Ring) (4T65E) 1998-2002 (casting #24203724) img#713 Item #U84713H | | Support, Driven Sprocket Support 4th clutch housing, (Used) Casting #24219592, 4T65E 2003-2011 img#713 Item #U84713GB | | FINAL DRIVE ASSEMBLY (used) INCUDES: RING GEAR, 38T SUN GEAR and CARRIER >>more img#715, 618, 598 Item #U84715DGK | | Sleeve, Channel Plate (Presses In Channel Plate) (440-T4, 4T60E) 84-99 img#755 Item #A84755S | | Channel Plate, (used) (4T60E) (Casting # 8682217) 1992-?? img#755 Item #U84755HA | | Sleeve, Channel Plate (Presses In Channel Plate) (4T65E) 97-Up img#755 Item #A84755SA | | Case (4T65E) 97-Up img#760 Item #U84760D | | Case (4T60E) (Square Top Bell) 91-99 img#760 Item #U84760C | | Pan, Bottom (4T60E) 91-99 img#765 Item #U84765A | | Pan, Bottom (4T65E) 97-Up img#765 Item #U84765B | | Pan, Side Cover (Used) (4T65E) (Except Volvo) 1997-Up img#766 Item #U84766C | | Cover, (used) Side Cover Stamped Steel cover. No mount bosses on outside. has a circle of 6 holes for inner gasket 4T60E 1990-To?? img#766 Item #U84766AB | | Extension Housing (with Bushing to Final Drive) (4T60E, 4T65E) 91-99 img#770 Item #U84770 | | Extension Housing (Good Used) (4T65E) (with Bearing to Final Drive) 97-Up (Not for Volvo) img#770 Item #U84770A | | HOUSING, (used) 1-2 / 2-3 Accumulator housing and cover 4T65E 97-UP (Does Not Include: tubes, pistons, pins, springs or bolts) img#929 Item #U84929G | | ACCUMULATOR ASSEMBLY (1-2, 2-3 Acumulator) (used) 4T60E ( Accumulator Body casting #8651533 Cover casting #8677163) img#929, 937 Item #U84929A | | Tubes, (used) 2-1 Servo, Lube tubes 4T65E 97-UP img#934 Item #U84934 | | PISTON, (used) 4TH CLUTCH 4T65E, 97UP img#961 Item #U84961G | | PISTON KIT, (used) 4TH CLUTCH (TH440-T4, 4T60E) 1984-96: Piston, return spring and snap ring img#961, 971, 862, 545 Item #U84961A | | Spring retainer and Snap ring 4th clutch (3.30" I.D. RETAINER) (used) (4T60E, 440T4 ) Includes: 862, 971 img#971, 862 Item #U84971 | | Spring retainer and Snap ring 4th clutch (3.625" I.D. RETAINER) (used) (4T60E, 4T65E ) Includes: 862, 971 img#971, 862 Item #U84971A | | SPRING, (used) 2nd CLUTCH PISTON RETURN: INCLUDES SNAP RING #874 img#972, 874 Item #U84972 | | RETURN SPRING, (used) INPUT CLUTCH PISTON RETURN (4T65E) img#974 Item #U84974G | | RETURN SPRING, (used) 3rd CLUTCH PISTON RETURN SPRING (4T60E 98-99 No check ball in piston) (4T65E 97-UP) img#975 Item #U84975G | | SPRING RETAINER, (USED) 3rd CLUTCH PISTON RETURN SPRING ASSEMBLY 1984-1998 440-T4, 4T60, 4T60E img#975 Item #U84975 | | RETAINER, (used) 3rd CLUTCH PISTON RETAINER (4T65E) img#985 Item #U84985 | |
PRESSURE / APPLY PLATES | Top |
Description |
Buy |
PLATE, (used) 2nd Clutch Apply Plate (.130") (4T60E) (FLAT) 91-99 img#125 Item #84146B | | PRESSURE PLATE, 4th Clutch Apply (.128") (4T65E) 97-Up img#140 Item #84140G | | PRESSURE PLATE, (used) 4th Clutch Apply (.133") (4T60E) 93-99 img#140 Item #U84140B | | PRESSURE PLATE, (used) 4th Clutch Apply (Stepped on one side .162") (440-T4, 4T60E) 87-93 img#140 Item #U84140A | | PRESSURE PLATE, (New) 4th Clutch Apply Plate (.133", 3.471" I.D.) (4T60E) 1993-99 img#140 Item #84140B | | PLATE, 2nd Clutch Apply Plate (.152") (4T65E) 97-Up img#143 Item #D84148C | | Pressure Backing Plate, (NEW) 2nd Clutch (.227") (4T65E) 97-Up img#144 Item #D84144E | | Pressure Plate, (used) 2nd Clutch Backing (top is Beveled .390" thick, .130" at snap ring) (4T60E) 91-99 img#144 Item #U84144D | | Pressure Backing Plate, (Used) 2nd Clutch (.227") (4T65E) 1997-Up img#144 Item #U84144E | | PRESSURE PLATE, 3rd Clutch Backing Plate (Good Used) (.150") 440-T4, 4T60E, 4T65E 84-Up img#146 Item #U84146A | | PRESSURE PLATE, (used) Input Clutch Backing Plate (.190") (Top) 84-Up img#148 Item #U84148 | | PRESSURE PLATE, (used) Input Clutch Apply Plate (.190") 440-T4, 4T60E, 4T65E 84-Up img#149 Item #U84149 | |
SEALING RINGS & RING KITS | Top |
Description |
Buy |
Ring Kit (4T60E) (For L98-99, Add 2 of 84179AT) 91-99 img#175, 177, 178, 179 Item #84175E | | Ring Kit (4T65E) L98-Up (For 97-E98, Add 84179KT) img#175, 177, 178, 179 Item #84175G | | Sealing Rings, 2nd Clutch (2 Vespel Rings and 2 Rubber Expander O-rings) 87-E98 img#179 Item #84179KT | | Sealing Rings, 2nd Clutch (4T60E L98-99) (4T65E L98-Up) (.100" Wide Plastic) (WHEN OUT ORDER RING KIT 84175E) img#179 Item #84179AT | |
SNAP RINGS | Top |
Description |
Buy |
Snap ring, (OE) Intermediate Sprag to Reverse Drum AOD, AODE, 4R70 80-Up ( 4T60E, 4T65E, Holds Pinion Pins In Differential Housing) img#874 Item #D76874 | | SNAP RING, (used) HOLDS PRESSURE PLATE #148 IN THE INPUT CLUTCH DRUM img#876 Item #U84876 | | SNAP RING, 3rd CLUTCH PISTON RETAINER to INPUT DRUM img#877 Item #U84877 | | SNAP RING, (used) 3rd CLUTCH PRESSURE PLATE to INPUT DRUM img#878 Item #U84878 | | SNAP RING, (used) 3rd CLUTCH PISTON RETURN SPRING RETAINER 84-UP img#879 Item #U84879 | | SNAP RING, DRIVE SPROCKET TO TURBINE SHAFT 84-UP img#880 Item #U84880 | | SNAP RING, (used) FINAL DRIVE RING GEAR TO CASE img#889 Item #U64889 | | Snap Ring, (NEW) Output Shaft to Axle Shaft 84-Up (Also 4T65E #895 DIFFERENTIAL SIDE GEAR to OutPut Shaft img#894, 895 Item #D84894 | | Snap Ring, (C-Clip Type) (USED) Output Shaft to Differential Side Gear 84-Up img#895 Item #U84895 | |
SPRAGS & ROLLER CLUTCH'S | Top |
Description |
Buy |
Sprag Assembly, (Used) 3rd and Input Sprag (4T60E, 4T65E) L93-02 img#646, 648, 656, 658, 667, 668, 669 Item #U84646BK | | Sprag Assembly, (New AMD) 3rd clutch sprag (4T65E) 03-Up (INCLUDES: SPRAG, INNER and OUTER RACES) img#646, 656, 666, 667 Item #A84646D | | Sprag Assembly, (New AMD) Input clutch sprag (4T65E) 03-Up img#648, 658, 668, 669 Item #A84648D | | Sprag, 1-2 Roller (14 Roller, Plastic Cage) 4T60E, 4T65E 96-UP img#652 Item #A84652A | | ROLLER CLUTCH, LOW .435" SHORT ROLLERS (TH350 69-86) (TH700R4 82-86) (4T60E 1-2 Roller clutch: 16 Rollers 1991-95) img#654 Item #A44654 | | SPRAG, Roller Clutch: 3rd One Way Clutch 84-E93 (440-T4, 4T60E) img#656 Item #A84656 | | Sprag, Low Input 1991-E93 (0.400" Wide, Single Sprag Type) img#658 Item #A84658A | |
STEEL PLATES | Top |
Description |
Buy |
STEEL PLATE, 4th Clutch (.077") (5T) (440T4, 4T60E) 84-99 img#120 Item #84120 | | STEEL PLATE, 4th Clutch (.083") (3Teeth) (4T65E) 97-Up img#120 Item #84120G | | STEEL PLATE, 2nd Clutch (OVERSIZED) (.090") (36T) (4T65E) 97-Up img#124 Item #84124GA | | STEEL PLATE, 2nd Clutch (.068") (36T) (4T65E) 97-Up img#124 Item #84124G | | 2nd Clutch Steel Plate (.089", 34Teeth, Kolene) 1984-86 img#124 Item #84124C | | Steel Plate, 2nd Clutch (.076" - 34 TEETH, KOLENE) (440-T4, 4T60E) 1987-99 img#124 Item #84124D | | CUSHION PLATE (used) 2nd Clutch (.065") (36T) (4T65E) (Waved) 97-Up img#125 Item #U84125G | | WAVE PLATE (used) 2nd Clutch (.044") (34T) (440-T4, 4T60E) (Waved) 84-99 img#125 Item #84125 | | CUSHION PLATE (NEW) 2nd Clutch (.065") (36T) (4T65E) (Waved) 1997-Up img#125 Item #D84125G | | STEEL PLATE, 3rd Clutch (.090") (4T60E) 91-99 img#126 Item #84126 | | CUSHION PLATE, 3rd Clutch (.030") (4T60E) (Waved) 91-UP img#127 Item #84127 | | CUSHION PLATE, .040" WAVE PLATE 4T65E 1997-ON img#127 Item #D84127A | | Steel plate, Input Clutch (.076") Forward TH125 (80-01): Input Clutch 440-T4 (84-E90) 4T60E (91-Up) img#128 Item #64128 | | Steel plate, Input Clutch (20 Teeth, .050", 3.509" I.D.) 4T65E 1997-Up img#128 Item #84128 | | Input Clutch (.040") (Waved) 91-Up img#129 Item #64129 | | Wave Plate Input Clutch Cushion (.050") 440T4, 4T60E, 4T65E img#129, 128 Item #D84129 | | STEEL KIT 4T60E 1995-99 img#139 Item #K5200L-9 | | STEEL KIT 4T60E 1991-94 (INCLUDES: 2-84120, 6-84124D, 4-84128) img#139 Item #K5200H-9 | | Steel Module (4T65E) 97-Up img#139, 120, 124, 126, 128 Item #84139G | |
TORQUE CONVERTERS reman | Top |
Description |
Buy |
Torque Converter select returned 2 rows.
| TORQUE CONVERTER (reman.) GM 4T65E 10.75" DIAMETER, 9.8" BOLT CIRCLE (3.8L, 3.9L) 2200-2400 STALL: CODE: JZFM, JTFM 12491980, 24206447, 24213729, 24215416, 24216222, 24216232, 24230004, 24230005, 24230006, Gray or Orange Dot Add an addition refundable core charge of $50.00 Item #GM53 | | Torque Converter (reman) GM 4T60E, 4T65E: 245mm - 10.2" Diameter, 9.35" Bolt Circle, Carbon Woven 1500-1750 Stall / 2.3L, 2.4L, 3.1L, 3.3L, 3.4L, 3.8L, (CODES: FG, FL, FM, FGHB, FGKB, FLHB, FLQB, 24212743, 24222019, 24222784, 24224255, 24222789, 24227094) Add an addition refundable core charge of $90.00 Item #GM71CW | |
WASHERS & BEARINGS | Top |
Description |
Buy |
Washer Kit (4T60E) (No Selectives) 91-99 img#200 Item #84200 | | Washer Kit (4T65E) 97-Up (No Selectives) img#200, 217 Item #84200G | | Bearing Kit, Torrington Bearings 1984-95 440T4, 4T60E, (PARTIAL 4T65E) Includes: D84217, D84229, D84232A, D84238, D84251, D84257, D84254, D84247, D64292, D84265 img#201 Item #K52941H | | Bearing Kit, Torrington bearing set, (4T60E 1996-99) (4T65E 1997-UP) img#201 Item #K52941M | | Washer Repair Kit, Front and Rear Planet carrier pinion gear washers and Some Final Drive Planet (16 Steel Washers) (.850" OD, .440" ID) 1991-Up img#204, 582, 584 Item #84204B | | BEARING, Pump Shaft Bearing 91-99 (4T60E) img#209 Item #84209 | | BEARING, (used) 4th Clutch Hub to Case Cover; 440-T4, 4T60E 84-99 img#217 Item #U84217 | | WASHER, 4th Hub to Case Cover (3 Tabs) (AMD Teflon Coated) (4T65E) 97-Up img#217 Item #84263G | | WASHER, 4th Hub to Case Cover (OE DELCO, Teflon Coated) (4T65E) 1997-Up img#217 Item #D84263G | | BEARING (THRUST BEARING (Channel Plate to 4th Clutch Hub) 440T4, 4T60E img#217 Item #D84217 | | Bearing, Inside 4th Clutch Hub 440-T4, 4T60E 84-99 img#220 Item #A84220A | | WASHER Driven Sprocket Support to 2nd Clutch Drum (Teflon Coated Metal) (4T65E) 97-Up img#226 Item #84226G | | WASHER, Driven Sprocket Support to 2nd Clutch Drum ( 2 TABS, 3.912" O.D.) (440-T4 84-93) (4T60E 91-99) img#226 Item #84226 | | BEARING, Sprocket Support to Input Drum 1984-Up (2.990" OD X 1.980" ID X .158") 440T4, 4T60E, 4T65E, 1984-ON img#229 Item #D84229 | | SELECTIVE WASHER, (O.E.) Input Drum (4.25-4.35mm) (Purple) 91-Up img#230 Item #84230HA | | Shim, Input Drum to Support bearing (.020") (each) 91-Up img#230 Item #84230SA | | BEARING, Input Drum to Sprag Race 1991-UP (2.058" OD X 1.345" ID X.135") Has lip to snap into position img#232 Item #D84232A | | Bearing, Input Planet (Captured) (440-T4, 4T60E, 4T65E, 1984-Up) Overdrive Planet (Captured inside the planet) (4L80E, 91-Up) img#237, 217 Item #84237 | | Bearing, (USED) Front Planet to Rear Planet 84-Up (3.210" x 2.035" x .196") img#238 Item #U84238 | | Bearing, Front Planet to Rear Planet 84-Up (3.210" x 2.035" x .196") img#238 Item #D84238 | | Bearing, Sun Gear (Split, Inner Plastic Cage) (.750" Long) 91-6/93 img#241 Item #D84241A | | BEARING (2.000" OD) (TH125/ 125C, 4T60E Final Drive Sun Gear to Differential Carrier) (TH125/125C, TH200/C, TH200-4R, TH325, TH325-4L Sun Gear to Rear Ring Gear) img#247 Item #D54247A | | BEARING, Sun Gear to Differential Carrier (2.190" OD) 91-Up img#247 Item #D84247B | | Sun Gear to Differential Carrier (2.350" OD) L00-Up img#247 Item #D84247A | | BEARING, Differential Carrier to Sun Gear, 2.130" Outer Diameter (1984-on) 440-T4, 4T60E img#247 Item #D84247 | | BEARING, Rear Planet to Sun Gear Drum 84-Up img#251 Item #D84251 | | BEARING, Internal Gear to Park Gear 96-Up ( 2.740" X 1.690" X .149" ) img#254 Item #D84254A | | BEARING, Internal Gear to Park Gear 1984-95 (2.598" X 1.633" X 0.145") img#254 Item #D84254 | | Bearing, Torrington (NEW) Differential to Extension Housing (with Caged Bearing to Final Drive Type Extension Housing) 91-Up (WHEN OUT BUY BEARING KIT) (2.595" OD X 1.925" ID X .140" THICK) more >>> img#257, 292 Item #D84257 | | WASHER Drive Sprocket to Channel Plate (3 Tabs, 1.466" I.D. X 1.994" O.D.) (4T65E) 97-Up img#278 Item #84278G | | WASHER Drive Sprocket to Channel Plate (3 Tabs, 1.392" I.D. X 1.952" O.D.) (4T60E) 91-99 img#278 Item #84278 | | WASHER, Drive Sprocket to Support (3 Split Locking Tabs) (4T65E) 01-Up img#279 Item #84279H | | WASHER Drive Sprocket to Support (4 round Tabs, 2.603" O.D.) (TH125 86-01), 440-T4 (84-93), 4T60E (91-99) img#279 Item #64279A | | WASHER, Drive Sprocket to Support (3 Round Solid Tabs) (4T65E) 97-00 img#279 Item #84279G | | WASHER 4th Clutch Hub to Driven Sprocket (4 round tabs, 2.469" O.D.) (4T65E) 97-Up img#280 Item #84280G | | WASHER, 4th Clutch Hub to Driven Sprocket (4 round Tabs, 2.830" O.D.) (4T60E, 440-T4) 84-99 img#280 Item #84280 | | WASHER Driven Sprocket to Support (4 Legs) (4T60E, 440-T4) 84-99 img#281 Item #84281 | | WASHER Driven Sprocket to Support (3 Legs) (4T65E) 97-Up img#281 Item #84281G | | BEARING, Coast Drum to Forward 1-2 Band Drum (96-Up) Between Drums (3.470" OD X 2.296" ID X .165") img#286 Item #84286C | | BEARING: (4T60E 1-2 Sprag Race to Forward 1-2 Band Drum 91-95) (200-4R Rear Planet to Sprag Race; 81-90) img#286, 242 Item #D54242AA | | Bearing, Torrington (new) Differential to Housing (4T60E, 4T65E with Bushing Type Extension Housing) 91-Up (TH125 ALL) img#292 Item #D64292 | | Bearing, Converter Reactor (Presses Inside) (Caged Needle Bearing) 80-Up img#295 Item #D64295 | | Bearing, Driven Sprocket Support (Presses Inside Support) (Caged Needle Bearing) 84-Up img#298 Item #84298 | | Bearing Channel Plate (Axle shaft bearing) (4T65E) 1997-Up img#299 Item #D84299H | |
|